BEAMTECH H7 LED Fog Light Bulbs 6500K Xenon White - Pack of 2, Fanless Design for Cars, Trucks, SUVs - Perfect for Night Driving in Foggy Conditions

Just a preface... I am using these in my 2017 Honda Accord EX-L Coupe for low beams only. I already had LED H11 Headlights previously installed 2 years ago.. I believe its chip controlled so you can jut swap out the halogens...but...READ YOUR VEHICLE INSTALLATION AND PLUG SUPPLIED INFO FIRST. You may need a new LED capable wire harness and/or plug. I did not.At any rate, the search for these 25W each H11 LED's at 6500k (kelvin, or brightness color) was relatively painless. I saw a set with lots of buyers and reviews from a company called BEAMTECH. Again, they have great reviews, the product looked to be exactly what I needed and the price was right. I ordered this set right then and there.My passenger side LED blew and was unusable. Upon ordering I knew I would replace both sides for a perfect match (and to keep all voltage compatible).I received my package well padded within 2 days with Amazon Prime, as usual. After receiving the item I inspected it and HOPED this would be a straight replacement (would fit the adapter I currently use). I also hoped that at 6500k (the chosen white color) it would match what I previously had in there. To my great delight, IT DID!The following day I set out to do the installation myself, I'm OK with replacing bulbs, air filters and such. I know a little bit about cars. I popped the hood on a hot, humid 85 degree morning. I knew where the proper plugs were already so it was only a matter of removing the old one's first (5 Mins.) Next I opened the new LED's box and once again was very pleased with the quality of the unit and the packaging. The wiring harness was the exact match from old ones to new! I then installed both sides(5 Mins.). Check the operation of the new LED's first BEFORE mounting and inserrting them back into the headlight fixture. I checked and left was on but right wasn't. No big deal there as I already knew LED's ARE polarity (positive & negative) specific so if the LED does not turn on. Just have to reverse the harness plug and bulb to set the polarity correct. VERY EASY. BAM! They both turned on, looked GREAT, AND matched all the other LED's I have installed (fog lights, running lights and high beams are all LED). After mounting the new bulbs back in the headlight enclosure, I was very pleased. They fit perfect and looked great! After the install I lowered the hood, turned on all of my headlights, fogs, and rear again. It really matched perfectly and even drew a clean beam output perfectly on the road. So all in all, tops a 20 minute job! Saved a ton of cash doing it myself too.I then packed everything back up, shutdown the car and back into the AC I went.I want to tell you this...I am so happy beyond words when a plan comes together as easy as this did. I knew I could get pulled over and get a ticket for something this trivial and wasn't willing to take that chance. I barely broke a sweat. So hats off to you BEAMTECH, you have another happy customer! GREAT PRODUCT! Will definitely recommend and come back when I need more.